Using rational assessment to comply with SANS 10400 part XA

An alternative compliance path exists to the SANS 10400 part XA prescriptive energy regulation. Using it usually results in reduced cost of compliance while achieving better energy performance. Learn about how the rational assessment works and in which projects it makes sense.

New guidance on using electric resistance geysers in houses with solar panels

With the declining cost of rooftop solar electricity, resistance geysers are being revisited as a way to generate hot water because they are able to store daytime solar energy in the form of heat. This provides a solution that is simple to install and maintain with lower reticulation costs and heat losses. New developments in XA allow for resistance geysers to be used provided that a minimum amount of rooftop solar is present. Learn about how to calculate this and apply it to the building regulations for energy.

EDGE green ratings for residential and green bonds

EDGE (Excellence in Design for Greater Efficiencies) is fast becoming the green building tool of choice in residential buildings in South Africa, with many of the larger property developers embracing it across the board. Learn about how EDGE works, as well as its link to green bonds and finance.

Watch this space for more information on this highly informative event!

The post Roadshow – Support for Residential Projects appeared first on Solid Green Consulting.

To illustrate this point, let us investigate the best means of heating hot water with scenarios at the extreme ends of the energy price and carbon spectrum. If energy was very expensive and came predominantly from fossil fuels, then efficient hot-water heating technologies such as heat pumps or thermal-solar systems would make a lot of sense in terms of paybacks, lower electrical demand and reduced carbon emissions. On the other end of the spectrum, if energy were to be hypothetically free and completely renewable, efficient hot-water heating technologies would never make sense.

At some point on this continuum, a tipping point is reached. The question is, has this point been reached with rooftop PV at the current price? Analysis reveals that for, multi-unit residential and office buildings, it has indeed.

Solar Panel Array (Credit: MaxPixel)

Looking past the bad reputation that resistance hot-water heaters have gained, in part due to the lone prescriptive hot-water heating clause in SANS 10400 part XA, they have various advantages over solar-thermal or heat-pump systems. These advantages include:

• reduced maintenance
• simpler reticulation
• lower installation cost
• reduced space requirements
• silent operation
• easier concealment

Solving the problem of matching demand and production

In a conventional residential development, the economics of solar PV have been precarious given the absence of a feed-in tariff. Daytime peak solar output does not coincide with morning and evening demand peaks. Batteries are a solution to this, but their high price usually eliminates them as an option.

But what if there were another way? By coupling resistance water heaters – timed to heat mostly during daytime solar production peaks – with rooftop PV, one can use geysers as thermal batteries. Electrons that would otherwise have gone to waste are used to heat water.

Regulatory compliance

In deploying a rooftop PV system with geysers and timers to ensure peak production is absorbed by the geysers, there is a hurdle: the aforementioned energy regulation of SANS 10400 Part XA excludes resistance heating as an option for domestic hot water.

Comically, if interpreted at face value this allows one to light a diesel fire under a boiler, but not to power a geyser with 100% renewable solar energy.

Fortunately, this clause has been successfully challenged at building councils, where the improved environmental and economic performance of rooftop PV combined with timed resistance geysers has been demonstrated by way of rational assessment.

To meet the energy regulation, we have to show that at least half of the energy used to heat hot water comes from solar PV. This is not an onerous amount of PV and, in fact, the economics of it incentivise the developer or homeowner to maximise rooftop PV. In doing so, the submission is in line with the overriding regulation that states the intention of SANS 10400 Part XA: To reduce greenhouse gas emissions.

Analysis: Capacity generation

Analysis has shown that, for a given investment, a developer can buy more generating capacity by using a grid-tied PV system (and using geysers timed to heat water during daytime hours) rather than a solar hot-water system. The same applies when comparing this system with PV and heat pumps, assuming a set investment.

In other words, viewed at system-level, a given amount of money will produce better environmental performance if spent on grid-tied rooftop PV and geysers than if it were spent on alternative hot water heating technologies. This unexpected result has everything to with the declining price of rooftop PV, a trend that is set to continue.

In the details

If specifying such a system, attention must be paid to the thermal properties of the geyser. We now have a resistance-geyser energy labelling standard, and it pays one to pay a premium for a properly insulated geyser that scores well on this scale.

It is worth noting that in the absence of a minimum amount of rooftop PV, a geyser on its own will not be compliant with SANS 10400 XA. Similarly, it will not deliver good financial and environmental performance.

Viewed another way, using geysers to utilise excess solar power during the daytime production peak actually enables and incentivises developers to maximise PV area on residential rooftops.

To enquire about using geysers on projects that have rooftop PV installations, contact info@sans10400xa.co.za for details on a rational assessment of such a system.

The post The Return of the Geyser appeared first on Solid Green Consulting.